--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Brad,
>  
> The OutputChan0 setting on the Config Screen is not selecting pins or bits.  Rather it is selecting which Step/Dir hardware generator to be used which in turn is associated with specific Pins.  Maybe this will help:
>  
> http://www.dynomotion.com/Help/SchematicsKFLOP/KFLOPFunctionalDiagram.htm
>  
> But Yes - OutputChan0=4 will drive Output bits 36 and 37 in open collector mode.
>  
> More info here:
>  
> http://www.dynomotion.com/Help/StepAndDirection/StepAndDir.htm
>  
> Regards
> TK
>  
>  
>
>
> ________________________________
> From: bradodarb <bradodarb@...>
> To: DynoMotion@yahoogroups.com
> Sent: Wednesday, May 16, 2012 11:04 AM
> Subject: [DynoMotion] Re: Step and Dir on JP5
>
>
>  
> Hello Bengt,
>
> Yep, I do want to use axis channel 0, but not sure about the output channels.
>
> For example, I had to use output channels 8,9 and 10 on my personal machine because the drives I am using are expecting an LVTTL signal.
>
> Using those channels translated to pins 15-20 on JP7.
>
> I guess I am not clear how the input/output bits on the config screen relate to physical pins on various connectors.
>
> Thanks,
> Brad Murry
>
> --- In DynoMotion@yahoogroups.com, "Bengt Sjoelund" <cnc@> wrote:
> >
> > Hi Brad,
> >
> > Isnt it 0 - 1 - 2 - 3?
> >
> > Hope this works now with Yahoo as I have had a lot of problems for the last 24h
> >
> > Cheers
> > Bengt
> >
> > --- In DynoMotion@yahoogroups.com, "bradodarb" <bradodarb@> wrote:
> > >
> > >
> > >
> > > Hello Tom,
> > >
> > >
> > > We want to use pin 36 and 37 for step dir. The docs say that is axis 4.
> > >
> > > So in config and setup do I set output channel 4?
> > >
> > > Thanks,
> > >
> > > Brad Murry
> > >
> >
>

--- In DynoMotion@yahoogroups.com, "bradodarb" <bradodarb@...> wrote:
>
> Hello Tom,
>
>
> Thanks that diagram is excellent, sorry for not taking a better look.
>
>
> On power up now the kflop thinks every axis is encoder and my position counters go crazy.
>
>
> Thats not a real big deal as nothing is actually hooked up to them.
>
>
> I am having an issue where once I enable the axis channel 0 I can no longer manipulate the bits 36 and 37 in the digital IO screen.
>
>
> thoughts...?
>
>
> Thanks,
> Brad Murry
>
> --- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@> wrote:
> >
> > Hi Brad,
> >  
> > The OutputChan0 setting on the Config Screen is not selecting pins or bits.  Rather it is selecting which Step/Dir hardware generator to be used which in turn is associated with specific Pins.  Maybe this will help:
> >  
> > http://www.dynomotion.com/Help/SchematicsKFLOP/KFLOPFunctionalDiagram.htm
> >  
> > But Yes - OutputChan0=4 will drive Output bits 36 and 37 in open collector mode.
> >  
> > More info here:
> >  
> > http://www.dynomotion.com/Help/StepAndDirection/StepAndDir.htm
> >  
> > Regards
> > TK
> >  
> >  
> >
> >
> > ________________________________
> > From: bradodarb <bradodarb@>
> > To: DynoMotion@yahoogroups.com
> > Sent: Wednesday, May 16, 2012 11:04 AM
> > Subject: [DynoMotion] Re: Step and Dir on JP5
> >
> >
> >  
> > Hello Bengt,
> >
> > Yep, I do want to use axis channel 0, but not sure about the output channels.
> >
> > For example, I had to use output channels 8,9 and 10 on my personal machine because the drives I am using are expecting an LVTTL signal.
> >
> > Using those channels translated to pins 15-20 on JP7.
> >
> > I guess I am not clear how the input/output bits on the config screen relate to physical pins on various connectors.
> >
> > Thanks,
> > Brad Murry
> >
> > --- In DynoMotion@yahoogroups.com, "Bengt Sjoelund" <cnc@> wrote:
> > >
> > > Hi Brad,
> > >
> > > Isnt it 0 - 1 - 2 - 3?
> > >
> > > Hope this works now with Yahoo as I have had a lot of problems for the last 24h
> > >
> > > Cheers
> > > Bengt
> > >
> > > --- In DynoMotion@yahoogroups.com, "bradodarb" <bradodarb@> wrote:
> > > >
> > > >
> > > >
> > > > Hello Tom,
> > > >
> > > >
> > > > We want to use pin 36 and 37 for step dir. The docs say that is axis 4.
> > > >
> > > > So in config and setup do I set output channel 4?
> > > >
> > > > Thanks,
> > > >
> > > > Brad Murry
> > > >
> > >
> >
>